Data Acquisition Systems

;

Data Acquisition Systems

Keeping in sync with time, we are able to offer Data Acquisition Systems to our respectable clients. The offered range of data acquisition systems is ideally utilized for various tasks such as monitoring, motion control, data acquisition and automated testing. In this range we offer Universal PCI Multifunction Card, Data Acquisition Systems, Data Acquisition Module and many more. Moreover, the offered range of data acquisition systems is available in numerous designs such as PC/104, PCI-bus, ISA-bus and USB-based. Available with rich wiring terminals and extensive support software, the offered range is known for its characterization with rich wiring terminals and extensive support software. The offered data acquisition systems are compatible with versatile industrial PC chassis, backplanes and others like CPU modules, flat panel monitors and embedded automation computers. Products incorporated in this range are mentioned below:


PCI-1710HGU-PCI Multifunctional Card

Main Features
  • 16 single-ended & 8 differential/blend of analog inputs
  • 12-bit A/D converter, with sampling rate ranging up to 100 kHz
  • Programmable gain for each input channel
  • Free combination of single-ended and differential inputs
  • On-board 4 K samples FIFO buffer
  • Two 12-bit analog output channels
  • 16 digital inputs and 16 digital outputs
  • Programmable pacer/counter
  • Board ID switch
  • Short circuit protection

images/pci-1762.jpg

PCI-1756 - PCI Card

Main Features
  • 64 isolated digital input channels
  • Output status read-back for output channels
  • Keeps digital output values after hot system reset
  • Either +/- voltage input for DI by group
  • High-voltage isolation for input channels (2,500 VDC).
  • Wide input range (10 ~ 50 VDC)
  • High ESD protection (2,000 VDC )
  • High over-voltage protection (70 VDC )
  • Board ID
  • Interrupt handling capability
  • Provides convenient wiring terminal module with LED indicators for
  • DIN-rail mounting
  • High-density 100-pin SCSI connector

images/pcl-745s.jpg

PCI-1762- Data Acquisition System

Main Features
  • 16 relay output channels
  • 16 isolated digital input channels
  • LED indicators for reflecting activated relays
  • Jumper selectable form A/Form B-type relay output channel
  • Output status read-back
  • Retain relay output values when hot system reset
  • High-voltage isolation on input channels (2,500 VDC)
  • High ESD protection (2,000 VDC)
  • High over-voltage protection (70 VDC)
  • Wide input range (10 ~ 50 VDC)
  • Interrupt handling capability
  • High-density DB-62 connector
  • Board ID switch

images/pci-1706u-card.jpg

PCL-745S-Communication Cards

Main Features
  • Two independent RS-422/485 serial ports
  • Provides 3000 VDC isolation
  • Provides 2500 VDC surge protection
  • 16C550 UARTs with on-chip 16-byte FIFO
  • Transmission speeds up to 921.6 kbps
  • I/O address and interrupt selectable
  • Wide IRQ selection : 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15
  • Supports 2 wire or 4 wire operation
  • Supports Tx, Rx, RTS, and CTS signals
  • Automatic RS-485 data flow control or RTS control
  • Termination resistors jumper enable/disable
  • Supports standard DOS COM1, COM2, COM3, and COM4
  • Supports Windows® 98/2000/XP, Linux®
  • Powerful and easy-to-use utility (ICOM Tools)

images/pci-1718hdu.jpg

PCI-1706U Card

Main Features
  • 8 differential analog inputs
  • 8 A/D converters simultaneously sampling
  • 16-bit A/D converter, with up to 250kHz sampling rate for each channel
  • Programmable gain
  • Onboard FIFO memory up to 8K Sample
  • Multiple A/D triggering modes
  • Programmable pacer/counter
  • BoardID™ switch
  • Universal PCI Bus (supports 3.3V or 5V PCI bus signals)

images/usb-4751.jpg

PCI-1718HDU Multifunctional PCI Card

Main Features
  • ISA-Compatible with PCL-818HD
  • 16-ch single-ended or 8-ch differential analog input
  • 12-bit A/D converter, with up to 100 kHz sampling rate
  • Programmable gain
  • Automatic channel/gain scanning
  • Onboard FIFO memory (1,024 samples)
  • One 12-bit analog output channel
  • 16-ch digital input and 16-ch digital output
  • Universal PCI bus (support 3.3 V or 5 V PCI bus signal)
  • BoardID™ switch

images/p16r16dio.jpg

USB-4751 Digital 10 Modules

Main Features
  • Compatible with USB 1.1/2.0
  • Portable
  • Bus-powered
  • 48 TTL digital I/O lines
  • Emulates mode 0 of 8255 PPI
  • Buffered circuits for higher driving capacity than 8255
  • Interrupt handling
  • Timer/Counter interrupt capability
  • Supports both dry and wet contact
  • 50-pin Opto-22 compatible box header
  • Suitable for DIN-rail mounting
  • One lockable USB cable for secure connection included

images/dn-37.jpg

P16R16DIO Relay Output Board

Main Features
  • Relay output Channel
  • Optically isolated digital input channels
  • AC/DC signal input ; AC signal input with filter
  • Connector pin assignment is compatible to 725 series
  • Power Requirements : 200 mA @ +5 V (max.) ; 260 mA @ +12 V (max.)
  • LED indicator for each relay output state

images/dn-37-381.jpg

DN-37/DN-37-A

Main Features
  • I/O Connector Block with DIN-Rail Mounting
  • Two 37-pin D-sub connector (One for expansion)
  • Pin to Pin screw terminal for I/O connected
  • Pitch : 5.08 m/m
  • Dimension : 148mm x 76mm

images/pci-1724u.jpg

DN-37-381

Main Features
  • I/O Connector Block with DIN-Rail Mounting
  • Two 19-pin header
  • Pin to Pin screw terminal for I/O connected
  • Pitch : 381mm(0.150inch)
  • Dimension : 103mm x 86mm

images/pcl-745s.jpg

PCI-1724U Data Acquisition System

Main Features
  • 32 high-density analog output channels
  • Flexible Output Range : +/-10 V, 0 ~ 20 mA and 4 ~ 20 mA
  • Synchronized output function
  • Keeps output values after system hot reset
  • Board ID switch

images/pci-1706u-card.jpg

PCL-745S- Communication Cards

Main Features
  • Two independent RS-422/485 serial ports
  • Provides 3000 VDC isolation
  • Provides 2500 VDC surge protection
  • 16C550 UARTs with on-chip 16-byte FIFO
  • Transmission speeds up to 921.6 kbps
  • I/O address and interrupt selectable
  • Wide IRQ selection : 3, 4, 5, 6, 7, 9, 10, 11, 12 or 15
  • Supports 2 wire or 4 wire operation
  • Supports Tx, Rx, RTS, and CTS signals
  • Automatic RS-485 data flow control or RTS control
  • Termination resistors jumper enable/disable
  • Supports standard DOS COM1, COM2, COM3, and COM4
  • Supports Windows™ 98/2000/XP, Linux™
  • Powerful and easy-to-use utility (ICOM Tools)

images/pci-1718hdu.jpg

PCI-1706U Card

Main Features
  • 8 differential analog inputs
  • 8 A/D converters simultaneously sampling
  • 16-bit A/D converter, with up to 250kHz sampling rate for each channel
  • Programmable gain
  • Onboard FIFO memory up to 8K Sample
  • Multiple A/D triggering modes
  • Programmable pacer/counter
  • BoardID™ switch
  • Universal PCI Bus (supports 3.3V or 5V PCI bus signals)

images/usb-4751.jpg

PCI-1718HDU Multifunctional PCI Card

Main Features
  • ISA-Compatible with PCL-818HD
  • 16-ch single-ended or 8-ch differential analog input
  • 12-bit A/D converter, with up to 100 kHz sampling rate
  • Programmable gain
  • Automatic channel/gain scanning
  • Onboard FIFO memory (1,024 samples)
  • One 12-bit analog output channel
  • 16-ch digital input and 16-ch digital output
  • Universal PCI bus (support 3.3 V or 5 V PCI bus signal)
  • BoardID™ switch

images/p16r16dio.jpg

USB-4751 Digital 10 Modules

Main Features
  • Compatible with USB 1.1/2.0
  • Portable
  • Bus-powered
  • 48 TTL digital I/O lines
  • Emulates mode 0 of 8255 PPI
  • Buffered circuits for higher driving capacity than 8255
  • Interrupt handling
  • Timer/Counter interrupt capability
  • Supports both dry and wet contact
  • 50-pin Opto-22 compatible box header
  • Suitable for DIN-rail mounting
  • One lockable USB cable for secure connection included

images/dn-37.jpg

P16R16DIO Relay Outpuut

Main Features
  • Compatible with USB 1.1/2.0
  • Portable
  • Bus-powered
  • 48 TTL digital I/O lines
  • Emulates mode 0 of 8255 PPI
  • Buffered circuits for higher driving capacity than 8255
  • Interrupt handling
  • Timer/Counter interrupt capability
  • Supports both dry and wet contact
  • 50-pin Opto-22 compatible box header
  • Suitable for DIN-rail mounting
  • One lockable USB cable for secure connection included
  • DN-37/DN-37-A

images/dn-37-381.jpg

DN-37/DN-37-A

Main Features
  • I/O Connector Block with DIN-Rail Mounting
  • Two 37-pin D-sub connector (One for expansion)
  • Pin to Pin screw terminal for I/O connected
  • Pitch : 5.08 m/m
  • Dimension : 148mm x 76mm

images/pci-1602u.jpg

DN-37-381

Main Features
  • I/O Connector Block with DIN-Rail Mounting
  • Two 19-pin header
  • Pin to Pin screw terminal for I/O connected
  • Pitch : 381mm(0.150inch)
  • Dimension : 103mm x 86mm

images/piso-p16r16.jpg

PCI-1602U/PCI-1602FU Data Acquisition system

Main Features
  • Universal PCI interface, supports both +5 V and +3.3 V PCI bus.
  • Card ID function
  • Pull-high/ pull-low resistors for DI
  • 16-channels digital Input
  • 16-channels digital output
  • 2 channels, 12-bit analog output
  • 16-bit high resolution, 100 k/Ss (200 kS/s for F version) A/D converter
  • 32 single-ended/16 differential analog inputs
  • Programmable low gain:1/2/4/8
  • Built-in 8 k WORD FIFO
  • Built-in Magic Scan controller
  • Support internal/external trigger
  • Three external triggers: post-trigger, pre-trigger, middle-trigger

images/piso-p16.jpg

PISO-P16R16U/PEX-P16R16i/PEX-P8R8i

Main Features
  • PCI-Express (3.3 V/12 V) for the PEX-P16R16i/PEX-P8R8i
  • Universal PCI (3.3 V/5 V PCI bus) for the PISO-P16R16U
  • Supports CardID (dip-switch)

images/pex-p8r8i.jpg

PISO-P16R16U/PEX-P16R16i

Main Features
  • 16-channel relay output
  • 16-channel optically isolated (3750 Vrms) digital input
  • Selectable DC signal input filter
  • AC Signal input with filter

images/8-ch-analog-.jpg

PEX-P8R8i

Main Features
  • 8-channel relay output
  • 8-channel optically isolated (3750 Vrms) digital input
  • Selectable DC signal input filter
  • AC Signal input with filter

images/15-ch-digital-.jpg