Power Over Ethernet POE Switch

POE Switch

Main Features
  • 24-Port 10/100 Mbps Fast Ethernet ports with PoE Injector
  • 2 10/100/1000 Mbps TP and SFP shared combo interfaces
  • RS-232 male DB9 console interface for Switch basic management and setup
  • Reset button for system management
images/power-over-ethernet.jpg

POE switch

Main Features
  • All Gigabit Ethernet ports for 4 Copper and 2 SFP
  • Back-plane (Switching Fabric): 12Gbps
  • Embedded 4 ports PoE inject function
  • Provide 30W at 55V power output
  • Redundant Power Design
  • IP-30 Chassis Design
  • Supports operating temperatures from -40 ~ 75°C
images/rj-45-interface.jpg

POE Switch

Main Features
  • Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard
  • 16-Port 10/100 Mbps with 8-Port PoE Web Smart PoE Switch
  • 8-Port support 48 VDC power to PoE Powered Device (Port 1 to port 8)
  • Each Switching port supports auto-negotiation-10/20, 100/200 Mbps (Fast Ethernet) supported
  • Auto-MDI / MDI-X detection on each RJ-45 port
  • Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE
  • frame flow control (Full-duplex)
  • High performance Store and Forward architecture, broadcast storm control,
  • runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • 4K MAC address table, automatic source address learning and ageing
  • 2.75 Mb embedded memory for packet buffers
  • Remote Web interface for Switch management and setup
  • SNMP Trap for alarm notification of events
  • Broadcast Storm Control support
  • Supports up to 16 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN
  • Supports up to 2 Trunk groups, each trunk for up to maximum 4 ports with
  • 800 Mbps bandwidth
  • Supports QoS, bandwidth control and MAC address filter / TCP & UDP filter on
  • each port
  • Supports port mirroring function and IGMP Snooping v1 / v2
images/24-port-10.jpg

POE Switch

Main Features
  • Provides 5 Fast Ethernet ports with 4 PoE ports with injector function
  • Supports 10/100 Mbps Auto Negotiation
  • Provides broadcast storm protection
  • Supports Ethernet ESD protection
  • Provides Slim size, DIN-rail/Wall mount with IP30 metal mechanism
  • Supports Redundant 48 VDC power input and P-Fail relay
  • Supports operating temperatures from -10 ~ 60° C
images/poe-switch3.jpg

POE Switch

Main Features
  • Provides 5 Fast Ethernet ports with 4 PoE ports with injector function
  • Supports 10/100 Mbps Auto Negotiation
  • Provides broadcast storm protection
  • Supports Ethernet ESD protection
  • Provides power line EFT protection
  • Provides Slim size, DIN-rail/Wall mount with IP30 metal mechanism
  • Supports Redundant 24/48 VDC power input and P-Fail Relay
  • Supports operating temperatures from -10 ~ 60° C
images/poe-switch4.jpg

POE Switch

Main Features
  • 2 Gigabit Copper/SFP combo ports, plus 8 PoE injector ports
  • SFP socket for Easy and Flexible Fiber Expansion
  • Redundancy: Gigabit X-Ring (ultra high-speed recovery time < 10ms), RSTP/STP (802.1w/1D)
  • Management: Web, Telnet, Serial Console, SNMP
  • Control: VLAN/GVRP, QoS, IGMP Snooping/Query, LACP, Rate Limit
  • Security: IP/MAC and port binding, DHCP Server, IP access list, 802.1X, SNMPv3
  • Diagnostic: Port Statistic, Port Mirroring, RMON, Trap, Email Alert, Syslog
  • Dual 48 VDC power input and 1 relay output
  • Supports wide operating temperatures (-40 ~ 75° C)
images/poe-switch5.jpg

POE switch

Main Features
  • Supports 10/100/1000T(X) for PoE in and Data out
  • IEEE802.3af compliant split power/data from PoE equipment
  • Power isolation and short circuit protection for power output
  • Supports output power up to 12.95 W at 24 VDC
  • Provides slim size and DIN-rail/Wall mount with IP30 metal mechanism
  • Supports operating temperatures from -40 ~ 75° C
images/poe-switch.jpg

POE Switch

Main Features
  • Supports 10/100/1000Base-T (X) for PoE+ OUT and Data IN
  • IEEE 802.3af/at compliant, supports a full 30 watt output
  • Power isolation and short circuit protection for power output
  • Power input (24 ~ 48 VDC), inject 30 W for each port
  • Provides slim size and DIN-rail/Wall mount with IP30 metal mechanism
  • Supports operating temperatures from -40 to 75°C
images/poe-switch7.jpg

POE switch

Main Features
  • Provides 6 Fast Ethernet ports with 4 PoE ports with injector function
  • Supports 10/100 Mbps Auto Negotiation
  • Provides broadcast storm protection
  • Supports Ethernet ESD protection
  • Provides Slim size, DIN-rail/Wall mount with IP30 metal mechanism
  • Supports Redundant 48 VDC power input and P-Fail relay
  • Supports wide operating temperature -40 ~ 75° C
images/pci-1710hgu.jpg