Send Email
Send SMS
Search
Electro Engineering Enterprises
Electro Engineering Enterprises


Ethernet based modules

  • Analog Input Model.
  • Multifunction I/O.
  • Digital I/O.
  • Relay Output & Digital Input.
  • DC Digital Input and Output.
  • Power Relay Output.

DC Digital Input and Digital Output(ET-6052D)

REQUEST CALLBACK

DC Digital Input and Digital Output(ET-6052D)
Ask for Price

Digital Output Channels: 8 (Source)External Power: 12 ~ 45 VDC Output Type: Isolated (N-MOSFET, Open Source)Load Current: 1.4 A/channel Over-Voltage Protection: +48 VDC Direct Drive Power Relay Module Short Circuit Protection and Current Limitation Switching Inductive Loads
Digital Input Channels: 14 (Sink/Source)Dry Contact On Voltage Level: Close to GND Off Voltage Level: Open Wet Contact On Voltage Level: +10 ~ 15 VDC Off Voltage Level: +3V (Max.)
Yes! I am interested

Power Relay Output (ET-6060D)

REQUEST CALLBACK

Power Relay Output (ET-6060D)
Ask for Price

Digital Output Channels: 8Output Type: Power Relay, Form A (Normal Open)Operating Voltage Range: 5 ~ 240VAC (47~63Hz) 5 ~ 24VDCRelay Contact Voltage Range: 0~ 250VAC (47~63Hz) 0~ 28VDCMax. Load Current: 3.0 A/channel Max. Operate Time: 15 ms max.Max. Release Time: 3 ms max.Insulation Resistance: Min. 1,000 MOhm, at 500 VDC Surge Strength: 10,000 V (at 1.2*50us)Relay Life: Electrical : 100,000, 28VDC@5A min., Resistive Mechanical :10 M operations@ no Load Condition Digital Input Channels: 10 (Sink/Source)Input Type : Isolation On Voltage Level : +10V ~ 50 VOff Voltage Level : +3V max.Input Impedance : 10K Ohm, 0.66WIntra-module Isolation : 3750 Vrms
Yes! I am interested

Tiny Ethernet Module with Digital Output(tET-A4/tPET-A4/tET)

REQUEST CALLBACK

Tiny Ethernet Module with Digital Output(tET-A4/tPET-A4/tET)
Ask for Price

  • Cost-effective Ethernet I/O modules (Modbus TCP/UDP slave)
  • Contains a 32-bit MCU that efficiently handles network traffic
  • 10/100 Base-TX Ethernet, RJ-45 x1
    (Auto-negotiating, Auto MDI/MDIX, LED Indicator)
  • Includes redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC input
  • Supports TCP, UDP, HTTP, DHCP, BOOTP and TFTP protocols
  • Supports UDP responder for device discovery
  • Supports web configuration and firmware update via Ethernet
  • Isolated digital input and output
  • Supports latched DI and 32-bit high-speed counter functions
  • Supports I/O pair-connection through the Ethernet
  • Dual-watchdog with power-on and safe value
  • Tiny form-factor with easy DIN-Rail mounting
  • RoHS compliant, no Halogen
  • Low power consumption (about 1.7 W only)
Yes! I am interested

Isolated 16-ch DO EtherCAT Slave I/O Module(ECAT-2045 )

REQUEST CALLBACK

Isolated 16-ch DO EtherCAT Slave I/O Module(ECAT-2045 )
Ask for Price

  • On the fly processing: EtherCAT
  • Powerful MCU handles efficient network traffic
  • 2 x RJ-45 bus interface
  • Distance between stations up to 100 m (100BASE-TX)
  • Support daisy chain connection
  • EtherCAT conformance test tool verified
  • Removable terminal block connector
  • LED indicators for the output status
  • Built-In isolated 16-ch digital outputs
  • RoHS compliant
  • ESD Protection 4 KV Contact for each channel
Yes! I am interested

 
X


Call Us:  +91-8071808444
Electro Engineering Enterprises
Ravindra Watve (Chief Executive)
Flat No. 101, Matrix Synergy Apartment, 10-2-19, West Marredpally ,
Secunderabad - 500026, Telangana, India
Contact via E-mail
Contact via SMS


Home  |   Profile   |  Our Products  |  Site Map  |   Contact Us   |   Mobile Site

© Electro Engineering Enterprises. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Electro Engineering Enterprises